KDF Search Results

The compatibility of plastic materials used in fuel storage and dispensing applications was determined for test fuels representing gasoline blended with 25 vol.% ethanol and gasoline blended with 16 and 24 vol.% isobutanol. Plastic materials included those used in flexible plastic piping and fiberglass resins. Other commonly used plastic materials were also evaluated. The plastic specimens were exposed to Fuel C, CE25a, CiBu16a, and CiBu24a for 16 weeks at 60oC.

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form and in
mid-level alcohol-gasoline blends with 24% vol./vol. iso-butanol-gasoline (IB24) and 30% vol./vol. ethanol-gasoline (E30).
A single-cylinder research engine is used with a low and high compression ratio of 9.2:1 and 11.85:1 respectively. The
engine is equipped with hydraulically actuated valves, laboratory intake air, and is capable of external exhaust gas

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to move the United States toward greater energy security and independence. A key provision of EISA is the Renewable Fuel Standard (RFS), which requires the nation to use 36 billion gallons per year (BGPY) of renewable fuel in vehicles by 2022.* Ethanol is the most widely used renewable fuel, and increasing the allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to as much as 21 BGPY.

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form
and in midlevel alcohol−gasoline blends with 24% vol/vol isobutanol−gasoline (IB24) and 30% vol/vol ethanol−gasoline (E30).
A single-cylinder research engine was used with an 11.85:1 compression ratio, hydraulically actuated valves, laboratory intake air,
and was capable of external exhaust gas recirculation (EGR). Experiments were conducted with all fuels to full-load conditions

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form
and in midlevel alcohol−gasoline blends with 24% vol/vol isobutanol−gasoline (IB24) and 30% vol/vol ethanol−gasoline (E30).
A single-cylinder research engine is used with an 11.85:1 compression ratio, hydraulically actuated valves, laboratory intake air,
and was capable of external exhaust gas recirculation (EGR). Experiments were conducted with all fuels to full-load conditions

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to
move the United States toward greater energy security and independence. A key provision of EISA is the
Renewable Fuel Standard (RFS) which requires the nation to use 36 billion gallons per year (BGPY) of
renewable fuel in vehicles by 2022.1 Ethanol is the most widely used renewable fuel, and increasing the
allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to 21BGPY.

This article summarises the compatibility of six elastomers – used in fuel
storage and delivery systems – with test fuels representing gasoline blended
with up to 85% ethanol. Individual coupons were exposed to test fuels for four
weeks to achieve saturation. The change in volume and hardness, when wetted
and after drying, were measured and compared with the original condition.

The Energy Independence and Security Act (EISA) of 2007 was an omnibus energy policy law designed to move the United States toward greater energy security and independence.1 A key provision of EISA modified the Renewable Fuel Standard (RFS) which requires the nation to increase the volume of renewable fuel blended into transportation fuels from 7.5 billion gallons by 2012 to 36 billion gallons by 2022. Ethanol is the most widely used renewable fuel, and increasing the ethanol content in gasoline to 15% offers a means of getting significantly closer to the 36 billion gallon goal.

Spark-ignition (SI) engines with direct-injection (DI) fueling can improve fuel economy and vehicle power beyond
that of port fuel injection (PFI). Despite this distinct advantage, DI fueling often increases particle number emissions, such that SI
exhaust may be subject to future particle emissions regulations. In this study, ethanol blends and engine operating strategy are
evaluated for their effectiveness in reducing particle emissions in DI engines. The investigated fuels include a baseline emissions

Ethanol offers significant potential for increasing the
compression ratio of SI engines resulting from its high octane
number and high latent heat of vaporization. A study was
conducted to determine the knock limited compression ratio
of ethanol - gasoline blends to identify the potential for
improved operating efficiency. To operate an SI engine in a
flex fuel vehicle requires operating strategies that allow
operation on a broad range of fuels from gasoline to E85.
Since gasoline or low ethanol blend operation is inherently

The compatibility of elastomer materials used in fuel dispensers was assessed for a gasoline standard containing 0, 10, 17, and 25 volume percent of aggressive ethanol. Specimens of fluorocarbon, fluorosilicone, acrylonitrile butadiene rubber (NBR), styrene butadiene rubber (SBR), silicone rubber, neoprene and polyurethane were immersed in test fuels flowing at a rate of 0.8m/s for 4 weeks at 60oC and then dried for 20h at 60oC.

The Energy Independence and Security Act (EISA) of 2007 was an omnibus energy policy law designed
to move the United States toward greater energy security and independence. A key provision of EISA is
the Renewable Fuel Standard (RFS) which requires the nation to use 36 billion gallons of renewable fuel
in vehicles by 2022. Ethanol is the most widely used renewable fuel, and a significant portion of the
36 billion gallon goal can be achieved by increasing the ethanol in gasoline to 15%. In fact in March

The compatibility of selected metals representative of those commonly used in dispensing
systems was evaluated in an aggressive E20 formulation (CE20a) and in synthetic gasoline
(Reference Fuel C) in identical testing to facilitate comparison of results. The testing was
performed at modestly elevated temperature (nominally 60°C) and with constant fluid flow in an
effort to accelerate potential interactions in the screening test.
Based on weight change, the general corrosion of all individual coupons exposed in the vapor

A broad-scale perspective on the nexus between climate change, land use, and energy requires consideration of interactions that were often omitted from climate change studies. While prior analyses have considered how climate change affects land use and vice versa (Dale 1997), there is growing awareness of the need to include energy within the analytical framework. A broad-scale perspective entails examining patterns and process at divers spatial and temporal resolutions.

The Center for Sustainability and the Global Environment (SAGE) at the University of Wisconsin has been developing global databases of contemporary and historical agricultural land use and land cover. SAGE has chosen to focus on agriculture because it is clearly the predominant land use activity on the planet today, and provides a vital service?i.e., food?for human societies. SAGE has developed a ?data fusion?

The harvest of corn stover or herbaceous crops as feedstocks for bioenergy purposes has been shown to have significant benefits from energy and climate change perspectives. There is a potential, however, to adversely impact water and soil quality, especially in Midwestern states where the biomass feedstock production would predominantly occur.

National interests in greater energy independence, concurrent with favorable market forces, have driven increased production of corn-based ethanol in the United States and research into the next generation of biofuels. The trend is changing the national agricultural landscape and has raised concerns about potential impacts on the nation?s water resources. This report examines some of the key issues and identifies opportunities for shaping policies that help to protect water resources.

Growing concern about climate change and energy security has led to increasing interest in developing renewable, domestic energy sources for meeting electricity, heating and fuel needs in the United States. Illinois has significant potential to produce bioenergy crops, including corn, soybeans, miscanthus (Miscanthus giganteus), and switchgrass (Panicum virgatum). However, land requirements for bioenergy crops place them in competition with more traditional agricultural uses, in particular food production.

This paper presents a range of future, spatially explicit, land use change scenarios for the EU15, Norway and Switzerland based on an interpretation of the global storylines of the Intergovernmental Panel on Climate Change (IPCC) that are presented in the special report on emissions scenarios (SRES). The methodology is based on a qualitative interpretation of the SRES storylines for the European region, an estimation of the aggregate totals of land use change using various land use change models and the allocation of these aggregate quantities in space using spatially explicit rules.

Power generation emits significant amounts of greenhouse gases (GHGs), mainly carbon dioxide (CO2). Sequestering CO2 from the power plant flue gas can significantly reduce the GHGs from the power plant itself, but this is not the total picture. CO2 capture and sequestration consumes additional energy, thus lowering the plant's fuel-to-electricity efficiency. To compensate for this, more fossil fuel must be procured and consumed to make up for lost capacity.