KDF Search Results

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to move the United States toward greater energy security and independence. A key provision of EISA is the Renewable Fuel Standard (RFS), which requires the nation to use 36 billion gallons per year (BGPY) of renewable fuel in vehicles by 2022.* Ethanol is the most widely used renewable fuel, and increasing the allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to as much as 21 BGPY.

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form
and in midlevel alcohol−gasoline blends with 24% vol/vol isobutanol−gasoline (IB24) and 30% vol/vol ethanol−gasoline (E30).
A single-cylinder research engine was used with an 11.85:1 compression ratio, hydraulically actuated valves, laboratory intake air,
and was capable of external exhaust gas recirculation (EGR). Experiments were conducted with all fuels to full-load conditions

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form
and in midlevel alcohol−gasoline blends with 24% vol/vol isobutanol−gasoline (IB24) and 30% vol/vol ethanol−gasoline (E30).
A single-cylinder research engine is used with an 11.85:1 compression ratio, hydraulically actuated valves, laboratory intake air,
and was capable of external exhaust gas recirculation (EGR). Experiments were conducted with all fuels to full-load conditions

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to
move the United States toward greater energy security and independence. A key provision of EISA is the
Renewable Fuel Standard (RFS) which requires the nation to use 36 billion gallons per year (BGPY) of
renewable fuel in vehicles by 2022.1 Ethanol is the most widely used renewable fuel, and increasing the
allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to 21BGPY.

This article summarises the compatibility of six elastomers – used in fuel
storage and delivery systems – with test fuels representing gasoline blended
with up to 85% ethanol. Individual coupons were exposed to test fuels for four
weeks to achieve saturation. The change in volume and hardness, when wetted
and after drying, were measured and compared with the original condition.

The Energy Independence and Security Act (EISA) of 2007 was an omnibus energy policy law designed to move the United States toward greater energy security and independence.1 A key provision of EISA modified the Renewable Fuel Standard (RFS) which requires the nation to increase the volume of renewable fuel blended into transportation fuels from 7.5 billion gallons by 2012 to 36 billion gallons by 2022. Ethanol is the most widely used renewable fuel, and increasing the ethanol content in gasoline to 15% offers a means of getting significantly closer to the 36 billion gallon goal.

Spark-ignition (SI) engines with direct-injection (DI) fueling can improve fuel economy and vehicle power beyond
that of port fuel injection (PFI). Despite this distinct advantage, DI fueling often increases particle number emissions, such that SI
exhaust may be subject to future particle emissions regulations. In this study, ethanol blends and engine operating strategy are
evaluated for their effectiveness in reducing particle emissions in DI engines. The investigated fuels include a baseline emissions

Ethanol offers significant potential for increasing the
compression ratio of SI engines resulting from its high octane
number and high latent heat of vaporization. A study was
conducted to determine the knock limited compression ratio
of ethanol - gasoline blends to identify the potential for
improved operating efficiency. To operate an SI engine in a
flex fuel vehicle requires operating strategies that allow
operation on a broad range of fuels from gasoline to E85.
Since gasoline or low ethanol blend operation is inherently

The compatibility of elastomer materials used in fuel dispensers was assessed for a gasoline standard containing 0, 10, 17, and 25 volume percent of aggressive ethanol. Specimens of fluorocarbon, fluorosilicone, acrylonitrile butadiene rubber (NBR), styrene butadiene rubber (SBR), silicone rubber, neoprene and polyurethane were immersed in test fuels flowing at a rate of 0.8m/s for 4 weeks at 60oC and then dried for 20h at 60oC.

The Energy Independence and Security Act (EISA) of 2007 was an omnibus energy policy law designed
to move the United States toward greater energy security and independence. A key provision of EISA is
the Renewable Fuel Standard (RFS) which requires the nation to use 36 billion gallons of renewable fuel
in vehicles by 2022. Ethanol is the most widely used renewable fuel, and a significant portion of the
36 billion gallon goal can be achieved by increasing the ethanol in gasoline to 15%. In fact in March

The compatibility of selected metals representative of those commonly used in dispensing
systems was evaluated in an aggressive E20 formulation (CE20a) and in synthetic gasoline
(Reference Fuel C) in identical testing to facilitate comparison of results. The testing was
performed at modestly elevated temperature (nominally 60°C) and with constant fluid flow in an
effort to accelerate potential interactions in the screening test.
Based on weight change, the general corrosion of all individual coupons exposed in the vapor

The harvest of corn stover or herbaceous crops as feedstocks for bioenergy purposes has been shown to have significant benefits from energy and climate change perspectives. There is a potential, however, to adversely impact water and soil quality, especially in Midwestern states where the biomass feedstock production would predominantly occur.

National interests in greater energy independence, concurrent with favorable market forces, have driven increased production of corn-based ethanol in the United States and research into the next generation of biofuels. The trend is changing the national agricultural landscape and has raised concerns about potential impacts on the nation?s water resources. This report examines some of the key issues and identifies opportunities for shaping policies that help to protect water resources.

Power generation emits significant amounts of greenhouse gases (GHGs), mainly carbon dioxide (CO2). Sequestering CO2 from the power plant flue gas can significantly reduce the GHGs from the power plant itself, but this is not the total picture. CO2 capture and sequestration consumes additional energy, thus lowering the plant's fuel-to-electricity efficiency. To compensate for this, more fossil fuel must be procured and consumed to make up for lost capacity.

This model was developed at Idaho National Laboratory and focuses on crop production. This model is an agricultural cultivation and production model, but can be used to estimate biomass crop yields.

Biomass is a significant contributor to the US economy--agriculture, forest and paper products, food and related products account for 5% of our GDP. While the forest products industry self generates some of their energy, other sectors are importers. Bioenergy can contribute to economic development and to the environment. Examples of bioenergy routes suggest that atmospheric carbon can be cycled through biofuels in carefully designed systems for sustainability. Significant potential exists for these options.

Ethanol is a very attractive fuel from an end-use perspective because it has a high chemical octane number and a high
latent heat of vaporization. When an engine is optimized to take advantage of these fuel properties, both efficiency and
power can be increased through higher compression ratio, direct fuel injection, higher levels of boost, and a reduced need
for enrichment to mitigate knock or protect the engine and aftertreatment system from overheating.

Increasing demand for crop-based biofuels, in addition to other human drivers of land use, induces direct and indirect land use changes (LUC). Our system dynamics tool is intended to complement existing LUC modeling approaches and to improve the understanding of global LUC drivers and dynamics by allowing examination of global LUC under diverse scenarios and varying model assumptions. We report on a small subset of such analyses.

Biofuels are presented in rich countries as a solution to two crises: the climate crisis and the oil crisis. But they may not be a solution to either, and instead are contributing to a third: the current food crisis.

Crop intensification is often thought to increase greenhouse gas (GHG) emissions, but studies in which crop management is optimized to exploit crop yield potential are rare. We conducted a field study in eastern Nebraska, USA to quantify GHG emissions, changes in soil organic carbon (SOC) and the net global warming potential (GWP) in four irrigated systems: continuous maize with recommended best management practices (CC-rec) or intensive management (CC-int) and maize–soybean rotation with recommended (CS-rec) or intensive management (CS-int).